Free Tool · No Sign-Up

Electrical Cost Calculator

Estimate any electrical job in seconds — outlets, panel upgrades, EV chargers, rewires, and full renovations. 2026 labor rates and material prices built in.

Electrical Job Cost Calculator

Estimate labor + materials + markup for common electrical jobs

Estimated total
$300 – $648
≈ $75 – $162 per outlet
Based on 0.5–1 hrs labor at $85/hr plus materials and a 20% markup. Add $100–500 for permits on panel work.

How the calculator works

Every estimate follows the same formula electricians use on real bids:

1. Labor

Job hours × your loaded hourly rate. Residential journeyman rates run $50–80/hr; master electricians $75–120/hr.

2. Materials

Wire, boxes, devices, and fixtures at 2026 supplier pricing. Copper prices move material costs — quote within 30 days.

3. Markup

Most electrical contractors use 20–35% to cover overhead and profit. Too low and you're working for free.

Common electrical job costs (2026)

Job Typical Price Labor Hours
Standard outlet$150 – $3000.5 – 1 hr
GFCI outlet$200 – $4000.5 – 1 hr
Ceiling fan$150 – $3501 – 2.5 hrs
Recessed light (per can)$150 – $2501 – 2 hrs
Dedicated circuit$200 – $5002 – 4 hrs
200A panel upgrade$1,800 – $3,5006 – 10 hrs
Level 2 EV charger$500 – $2,0002 – 6 hrs
Whole-house rewire (2,000 sq ft)$16,000 – $30,00040 – 80 hrs

For full pricing tables by license level, service call fees, and new-construction per-square-foot rates, see the complete electrician pricing guide.

Frequently Asked Questions

How do I estimate an electrical job?
Multiply your labor hours by your loaded hourly rate, add material costs, then apply your markup (most electricians use 20–35%). For example, installing four standard outlets takes about 0.5–1 hour each at $85/hour plus $20–50 in materials per outlet — roughly $450–$800 total with a 20% markup.
How much does an electrician charge per outlet?
In 2026, electricians typically charge $150–300 per standard outlet installed, $200–400 for GFCI outlets, and $300–600 for 240V outlets (dryers, ranges, EV chargers). Additional outlets in the same room usually cost less.
How much does an electrical renovation cost?
A partial electrical renovation (updating outlets, fixtures, and a few circuits) typically runs $2,000–8,000. A full whole-house rewire costs $8–15 per square foot, or $16,000–30,000 for a 2,000 sq ft home. Panel upgrades add $1,800–3,500. Costs rise with older wiring, plaster walls, and panel replacements.
What is a fair price for a 200 amp panel upgrade?
A 100A-to-200A panel upgrade typically costs $1,800–3,500 including materials and 6–10 hours of labor. Add $100–500 for permits and inspection fees, which are required in virtually all jurisdictions.
Should I charge for electrical estimates?
Many electricians charge $75–150 for a service call that covers the first 30–60 minutes, then apply the fee toward the job if hired. This covers your time for site visits and discourages tire-kickers while keeping the estimate essentially free for serious customers.

Skip the math. Estimate from photos.

SnapScope uses AI to turn job site photos into detailed electrical estimates—with labor, materials, and your markup built in.

Apple Download SnapScope for iOS

Free to try. No credit card required.

Related Pricing Guides

Electrical Cost Calculator

Free interactive tool: price outlets, panels, EV chargers, and rewires in seconds.

Painting Estimate Calculator

Cost per square foot, labor rates, and production speeds for 2026.

Roofing Estimate Calculator

Cost per square, shingle prices, and pitch multipliers for 2026.

Contractor Markup Calculator

Markup vs margin, overhead rates, and how to price jobs profitably.

Flooring Cost Calculator

Hardwood, laminate, tile, and carpet pricing per square foot for 2026.

Electrician Pricing Guide

Hourly rates, outlet costs, panel upgrades, and service call fees for 2026.